
Noble NGP-C45 Pump with Mains / Tank Switchover Controls. Controls had Failed & Pump would not Run

Davey KRB1 HP45-05 Pump with RB2 Rainbank Controller Installed

Davey KRB1 HP45-05 Pump with RB2 Rainbank Controller Installed

Existing Pump Cover Re-Used on Pump

Onga JMM100 Jet Pump with Faulty Controller

Pump with Controller Removed

New Controller Installed

Testing the Pump for Leaks and Correct Operation

Onga JMM100 & JSP110 Pumps Ready to be Collected by the Owner

Original Davey Rainbank Controller with HP45-05 Pump

Rainbank Check Valve with Worn Stem & Not Seating Correctly

Replacement KRB1 HP45-05 Pump & RB2 Rainbank Connected

Pump Suction Line Installed with Y Strainer. Mains Water Isolation Valve Installed for Future Maintenance

Orange HJ400PM with Original Blue Pressmatic Controller. Failure Light On & Won't Reset Indicating Circuit Board Failure

New Black Pressmatic Control Board Installed & Pump is Operating as It Should.

Failed Grundfos JPRain2MP Rainwater Pump for Garden Tap

Replacement TotalFlo TF50J-18 Installed.

Existing Pump Cover Reinstalled

Failed Aquamatic AAUM-25 Mains/Rainwater Switchover Controller with Claytech Divertron Submersible Pump in Tank

Davey Rainbank RB2/S Controller Installed with Davey D42A/B Multistage Submersible Pump in the Tank for Mains/Rainwater Switchover

Disassemble Pump Wet End because of Jammed Impeller

Gravel Removed from Pump Casing & Impeller Causing Pump to Jam

Honda WB20XT Reassembled & Ready for Testing

Trench for Pump Suction Line

Core Hole Drill for Pump Suction Line into Underground Concrete Tank

Backfilling Pump Suction Line Trench

50mm Poly Pipe Suction Line Installed

Trench Backfilled & Turf Reinstated

Davey 165S1T Pump Installed & Connected to Existing Pipework & Filter

Pump with Pump Cover Installed

Before - Faulty Pump

After - New Orange SP100VA Sump Pump with Vertical Float ready to be re-installed

Before - Faulty Rainbank would not run & Pump was Leaking

Pump & Rainbank Removed - Ready for Replacement

After - New Pump & Rainbank Installed with Pressure Regulating Valve

Before

After

Before

After

Before - Bianco Pump & Rainsaver

After - Davey KRB1 HP45-05 & RB2

After - Pump Cover Installed

Before - Worn & blocked pump impellers that need replacing

After - Impellers replaced & wet end reassembled with new seals

After - Pump reassembled & ready for testing

After - Testing for leaks & correct flow & pressure

Before

After

Before - Failed Pump with mains water solenoid valve

After - Davey KRB1 with HP45-05 Pump & RB2 Rainbank Controller

After - Pump cover from previous pump re-installed

Before - Pump is tripping Safety Switch due to being exposed to the weather. Water has entered the motor.

After - Totalflo Pump installed

After - Pump cover installed to protect the pump from the weather

Before - Pump has seized motor bearings

After - Grundfos Pump Installed

After - Existing pump cover re-installed

Before - Faulty Pump

After - Totalflo Pump Installed

Installed pump for underground rainwater tank with Acquasaver valve for Tank / Mains switchover